Repairing Damaged Concrete Floors

In New York City the construction never stops. That is the reason that new york city is also called the concrete jungle. Concrete is the most economical element in the construction industry. Most of the concrete companies use concrete in the base of the buildings because of the durability and many other advantages of concrete. But to use the concrete isn’t the right way is essential because if the concrete while using and applying it gets a little bit of carelessness.

Then the concrete will develop damages and cracks in it. Concrete gets cracks with time but those cracks come after a long time. There are two types of concrete damages and cracks. Small cracks can be easily repaired while big cracks can be repaired. The only solution for big cracks is the replacement of the floor for which the property owner needs to find the sidewalk repair Bronx.

Repairing Damaged Concrete Floors

First, you will have to inspect the type and intensity of the damage. If the damage is big then you will have to call the contractors. But if the cracks are small then you can easily repair the cracks by yourself. There are two ways to repair concrete floor cracks.

The first is to buy the concrete filler kit and follow the instructions given on it second is to use the old-style cement and filling the concrete with it. First, you will have to locate all the cracks on the floor. Then you will need to clean the floor. Wash the floor and let it dry. Because if the floor is wet the cement would not be settled properly.

After that clean the cracks using a power washer or air pressure blower. This way all the dust will lower the cracks. Then insp[ect if the cracks are not too small that the cement won’t go in them. If they are, use the crack wider tool and widen the cracks a bit so that cement is set in it.

After that insert the binding agent in the cracks and let it dry until then prepare the mortar or adding the right amount of cement water with that add bonding agent so that mortar strength increases. Leave the mortar for an hour or two to get the consistency that is required.

After that use a sponge and apply the water to the cracks. This way the cracks won’t absorb the mortar moisture. Apply the mortar and level it with a trowel. Apply the mortar deep in the cracks so that cracks get repaired from their roots. After that level the surface and apply the concrete sealer because this way the concrete life will expand.

Concrete is the most used factor in the construction industry. Many concrete companies use concrete to build different projects like houses, Big buildings, Roads, Sidewalks, and driveways.

Driveways are the most common construction of concrete. But there are some points to keep in mind while repairing the concrete floor. And that points are given above. By following these steps your floor will be repaired and become as good as new.